WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation Optional arguments which can be provided for the script. You can include device information with values given below this input field. The bootloader menu is a special router state used as a recovery tool in case the router becomes inaccessible even after a factory reset. It can be used to upgrade the router's firmware or bootloader version.

FW version RUT9_R_00.07.00 and above will not be supported on legacy-design (RUT955 *7V***) devices. A Scheduler Instance will not work unless you turn both the the Scheduler service and the individual instance on:

Panorama Antennas SMA Jack to SMA Plug Shielded Coax Cable - 3m

Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP Additional note: the deviation values specified above are applicable in temperatures of < 50 °C. Under higher temperatures the deviation values become considerably higher. Time interval - configured with a start and an end value which define a window of time during which the Condition is considered as TRUE. e.g.: The number of seconds after which the broker should send a PING message to the client if no other messages have been exchanged in that time

The I/O Juggler is a feature that provides the possibility to create automated rules that perform certain actions based on Input state changes and other conditions. The operating sequence of I/O Juggler can be visualized as such: Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server Choose this option if you want to select certificate files from device. Certificate files can be generated in Certificates section. Lastly, you can configure Conditions based on date and time. Date/time Conditions can be configured based on:Added validation that prevents automatic connection to first unencrypted WiFi AP when using MULTI AP NetSnapper (optional): Mobile connection management, data compression VPN client (not available in standard FW) CE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Alliance CE/RED, FCC, IC, PTCRB, RCM, EAC, CCC, RoHS, WEEE, IP rating, Anatel, GCF, REACH, E-mark, DNV GL, ECE Regulation 118, Morocco ANRT, Thailand NBTC, Ukraine UCRF, SDPPI (POSTEL), WiFi Certified, MODBUS Conformance

Additional note: SIM PIN on the main SIM card is the only user parameter that is kept after a factory reset. When set to 'on', the output maintains its new state after reboot (the state is changed in the config file as well). Enables periodic time synchronization for the system using the GPS module which does not require an Internet connection. Added the possibility to configure multiple reboot times in one Reboot Scheduler configuration instance Expanded the data that is sent to the Cumulocity cloud with device log, mobile data usage nd GPS data

QuWireless A955S QuSpot Integrated Omni LTE, Omni WiFi and GPS Antennas for Teltonika RUT955

Note: Firmware version RUT9_R_00.07.01 released on 2021.11.18 was removed due to an issue with keep settings functionality. Mode determines what options and configurations are shown. In Basic mode only the essential configurations are shown. In Advanced mode there is greater freedom to configure and access more options. The Sign the certificate slider control whether the certificate will be signed automatically or manually after the generation is complete. The output Scheduler can be used to configure a timetable of when an output should be turned on or off, based on days of the week or month and hours of the day. The General Configuration section is used to turn the Output Scheduler on or off.

Factory reset. If the reset button is pressed for at least 5 seconds (by default), the device will perform a factory reset and reboot. Subject information is not mandatory but can be used as user-friendly way to identify the ownership of certificate files by including such information as the owner's location and company name. QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e Changing states of various I/O is possible using requests. Below is a table containing syntax examples of this usage: Improved file/section deletion logic: now files are also deleted after deleting a related config section

FCC 47 CFR Part 15C (2017), FCC 47 CFR Part 2 (2017), FCC 47 CFR Part 22H (2017), FCC 47 CFR Part 24E (2017), FCC 47 CFR Part 27C (2017)